ECCS WIRING DIAGRAM — Nissan Micra (K11 LHD Models) — Centre / Body-Side (Supplement-VI)
EL-NC-ELECTRICAL_2-003wiring diagramCentre/body-side band of LHD ECCS foldout. Contains the cluster + lighting-switch / ignition-switch state-tables. Variant markers used: TM (tachometer), AC (with A/C), DL (with DRL), C (N·CVT), M (M/T).
NOTE
Centre band of the foldout — body-side loads tied into ECM via the EFI/Main harness inline pairs (M148/E69, M149/E70). Combination meter pins 11/16/19/20/23 carry the ECM signals to the cluster (speedometer / tach / MIL). Lighting and ignition switches each have a state-table block showing which contacts close in each position.
N·CVT control unit M102 sits on this page — that's the transmission-side input to ECM (idle-up, kickdown, gear-position).
WARNING
Wire colours, splice locations, and pin numbers are dense at downscaled resolution and many fine details (single-letter colour codes, splice IDs) are not legible. Always cross-check against the 300 dpi source raster before diagnosing.