COMBINATION SWITCH — Operational Check (Cont'd) — RHD Models (Supplement-VII)
EL-7012component photoRHD combination-switch operational check. Same function set as LHD but mirrored stalk positions. Pinouts of the three sub-connectors are identical between LHD/RHD.
Operational Check (Cont'd) — RHD Models
NOTE
RHD mirror of EL-7011. Switch function set is identical; only the stalk side is swapped (Wiper+Washer on left, Lighting+Fog+Turn on right). Pinouts on the three sub-connectors (LIGHTING/FOG/TURN 12-pin, WIPER 8-pin, WIPER secondary 2-pin) are identical to the LHD version — same wire colours, same pin numbers.
Right
FunctionLIGHT
PositionsMAIN BEAM (A) / DIP (B) / MAIN BEAM FLASH (C); rotate ring: 1ST / 2ND / OFF
Right
FunctionFOG LAMP
PositionsFRONT AND REAR / FRONT / OFF
Right
FunctionTURN
PositionsR / N / L
Left
FunctionWASHER
PositionsREAR / OFF / FRONT
Left
FunctionFRONT WIPER
PositionsMIST / OFF / INT / LO / HI
Left
FunctionREAR WIPER
PositionsOFF / WIPE
Continuity tables for each switch position are on the following page (EL-7013).