HEADLAMP — Dim-dip Lamp System — Wiring Diagram — M/T Model (without Super Multiple Junction) (Base K11)
EL-47wiring diagramUnverifiedBase K11 HEADLAMP — Dim-dip wiring, M/T-without-SMJ variant (UEL120). Dim-dip lamp unit (terminals 1-12) from 10A ignition feed + lighting switch. Headlamp RH R/G+R/L, LH R/B+R/Y, dim-dip line Y/B. Direct routing (no SMJ). Scan damage upper-left → some terminal IDs/colours flagged uncertain.
Wiring Diagram
M/T Model (without Super Multiple Junction)
Dim-dip wiring — M/T no-SMJ (UEL120)
Components (9)
BatteryFusible Link Box (15A fuse)Fuse Block (10A via ignition ON-or-START)Ignition Switch ON or STARTDim-dip Lamp Unit (terminals 1-12)Lighting Switch (OFF/1st/2nd × A/B/C)Headlamp R.H. (R/G, R/L)Headlamp L.H. (R/B, R/Y)Combination Meter (HIGH BEAM indicator)
Connections (11)
Fuse Block (10A via ignition ON-or-START)
Fuse Block (10A via ignition ON-or-START)Dim-dip Lamp Unit (terminals 1-12)Green/Red (ignition feed)
Dim-dip Lamp Unit (terminals 1-12)
Dim-dip Lamp Unit (terminals 1-12)Lighting Switch (OFF/1st/2nd × A/B/C)Red/White
Dim-dip Lamp Unit (terminals 1-12)Headlamp R.H. (R/G, R/L)Red/Green (RH high)
Dim-dip Lamp Unit (terminals 1-12)Headlamp R.H. (R/G, R/L)Red/Blue (RH low)
Dim-dip Lamp Unit (terminals 1-12)Headlamp L.H. (R/B, R/Y)Red/Black (LH high)
Dim-dip Lamp Unit (terminals 1-12)Headlamp L.H. (R/B, R/Y)Red/Yellow (LH low)
Dim-dip Lamp Unit (terminals 1-12)Headlamp L.H. (R/B, R/Y)Yellow/Black (dim-dip line)
Dim-dip Lamp Unit (terminals 1-12)Lighting Switch (OFF/1st/2nd × A/B/C)Purple
Fusible Link Box (15A fuse)
Fusible Link Box (15A fuse)BatteryWhite/Green
Fusible Link Box (15A fuse)Dim-dip Lamp Unit (terminals 1-12)Red/White (15A fused)
Combination Meter (HIGH BEAM indicator)
Combination Meter (HIGH BEAM indicator)Headlamp R.H. (R/G, R/L)Red/Green (HIGH BEAM indicator)
NOTE
Full dim-dip wiring for the M/T model WITHOUT Super Multiple Junction (direct harness routing, no SMJ splice). The Dim-dip Lamp Unit (terminals 1-12) drives the headlamp low beams dimly as clearance when ignition ON + lighting switch 1ST. Headlamp RH = R/G (high) + R/L (low); LH = R/B (high) + R/Y (low). The RHD/SMJ variant is on a separate page. Pairs with the EL-46 operation table.
WARNING
Source raster has black scan-damage artifacts across the upper-left quadrant (fuse block area, dim-dip unit connector labels). Some terminal IDs and wire-colour assignments in that region were read from partially-obscured print and may be incomplete; cross-reference EL-46/EL-48 and the SMJ foldout before relying on exact terminal numbers.