INTERIOR LAMPS — Illumination / Wiring Diagram (Cont'd) — L.H.D. Model With Daytime Running Lamps
EL-80wiring diagramDRL variant adds the controller as a power gate — if the illumination bus is dead but the side lights work, suspect the DRL unit's LG output before the lighting switch.
L.H.D. Model — With Daytime Running Lamps
NOTE
Variant markers same as EL-79 (IC = with illumination control, WIC = without). On DRL cars the illumination bus is gated by the DAYTIME LIGHT CONTROL UNIT (LG output) — illumination only comes on when the lighting switch is in the 1st or 2nd position, regardless of DRL state. Defogger switch on this page is the WITH TIMER variant; heater-control illumination is labelled FAN SWITCH (same load, slightly different name on the DRL pages).
Wiring Schematic
Components (15)
Connections (20)
IGN
IGNFB10AYellow — ignition feed
FB10A
FB10ADRLYellow — to DRL
LSW
LSWDRLWhite with Red — lighting-switch sense
DRL
DRLICSWLight Green — illumination bus enable
ICSW
ICSWCIGLRed with Blue — illumination bus
ICSWCVTSELRed with Blue
ICSWHCTRLRed with Blue
ICSWRDEFRed with Blue
ICSWHSWRed with Blue
ICSWRFOGRed with Blue
ICSWRADRed with Blue
ICSWMETERRed with Blue
CIGL
CIGLGND_METERBlack
CVTSEL
CVTSELGND_METERBlack
HCTRL
HCTRLGND_METERBlack
RDEF
RDEFGND_METERBlack
HSW
HSWGND_METERBlack
RFOG
RFOGGND_METERBlack
RAD
RADGND_METERBlack
METER
METERGND_METERBlack