HEADLAMP — Headlamp Aiming Control — Wiring Diagram (Base K11)
EL-53wiring diagramBase K11 HEADLAMP — aiming control full wiring (UEL123). Aiming switch 0/1/2/3 → 4 colour-coded position wires (OR/L, LG/L, G/L, PU/L) via SMJ (E55/M59, A10/A12/B10/D14) → RH+LH aiming motor units in parallel. Power: fuse block 10A (R/L) + fusible link box 65A (W/R). Pairs with EL-52 schematic.
Wiring Diagram
Headlamp aiming control wiring (UEL123)
Components (7)
BatteryFusible Link Box (65A) + FuseFuse Block (10A, refer to Power Supply Routing)Headlamp Aiming Switch (0/1/2/3, LED + resistor per position)S.M.J. (refer to Foldout page) — E55/M59 via A10/A12/B10/D14Aiming Motor Unit R.H. (motor coils + rotary sensor)Aiming Motor Unit L.H. (motor coils + rotary sensor)
Connections (13)
Battery
BatteryFusible Link Box (65A) + FuseWhite
Fusible Link Box (65A) + Fuse
Fusible Link Box (65A) + FuseHeadlamp Aiming Switch (0/1/2/3, LED + resistor per position)White/Red (65A fused feed)
Fuse Block (10A, refer to Power Supply Routing)
Fuse Block (10A, refer to Power Supply Routing)Headlamp Aiming Switch (0/1/2/3, LED + resistor per position)Red/Blue
Headlamp Aiming Switch (0/1/2/3, LED + resistor per position)
Headlamp Aiming Switch (0/1/2/3, LED + resistor per position)S.M.J. (refer to Foldout page) — E55/M59 via A10/A12/B10/D14Orange/Blue (position output)
Headlamp Aiming Switch (0/1/2/3, LED + resistor per position)S.M.J. (refer to Foldout page) — E55/M59 via A10/A12/B10/D14Light Green/Blue (position output)
Headlamp Aiming Switch (0/1/2/3, LED + resistor per position)S.M.J. (refer to Foldout page) — E55/M59 via A10/A12/B10/D14Green/Blue (position output)
Headlamp Aiming Switch (0/1/2/3, LED + resistor per position)S.M.J. (refer to Foldout page) — E55/M59 via A10/A12/B10/D14Purple/Blue (position output)
S.M.J. (refer to Foldout page) — E55/M59 via A10/A12/B10/D14
S.M.J. (refer to Foldout page) — E55/M59 via A10/A12/B10/D14Aiming Motor Unit R.H. (motor coils + rotary sensor)Orange/Blue (via A12, engine room harness RH)
S.M.J. (refer to Foldout page) — E55/M59 via A10/A12/B10/D14Aiming Motor Unit R.H. (motor coils + rotary sensor)Light Green/Blue (via B10)
S.M.J. (refer to Foldout page) — E55/M59 via A10/A12/B10/D14Aiming Motor Unit R.H. (motor coils + rotary sensor)Green/Blue (via A10)
S.M.J. (refer to Foldout page) — E55/M59 via A10/A12/B10/D14Aiming Motor Unit L.H. (motor coils + rotary sensor)Orange/Blue (engine room harness LH)
S.M.J. (refer to Foldout page) — E55/M59 via A10/A12/B10/D14Aiming Motor Unit L.H. (motor coils + rotary sensor)Light Green/Blue
S.M.J. (refer to Foldout page) — E55/M59 via A10/A12/B10/D14Aiming Motor Unit L.H. (motor coils + rotary sensor)Green/Blue
NOTE
Full wiring for the aiming control schematic on EL-52. The aiming switch's four positions each output a distinct colour-coded wire (OR/L, LG/L, G/L, PU/L) that routes through the S.M.J. (E55/M59 via A10/A12/B10/D14) to both aiming motor units (RH + LH) in parallel. Power comes from the fuse block (10A, R/L) plus the fusible-link-box 65A feed (W/R). Each motor unit contains the up/down motor coils and the rotary-sensor commutator that self-stops the motor at the selected position (EL-49/50). Body grounds at E3/E4 (RH), E55/E39 (LH), M74/M56/M10 (switch).
See also
S.M.J. Foldout page · Power Supply Routing