STARTING SYSTEM — Wiring Diagram — M/T Models (Supplement-VII)
EL-7004wiring diagramSupplement-VII M/T starter — identical architecture to Supplement-VI EL-6003, only variant-tag scheme changed. Wire colours unchanged: B/R for solenoid pull-in, W/B for ignition battery feed.
Wiring Diagram — M/T Models
Wiring Schematic
Components (9)
Connections (7)
BAT
BATFL30White — battery-side feed to fusible link box
BATMOTBlack with Yellow (gasoline) / B/L Black with Blue (diesel) — battery main feed to starter motor
FL30
FL30IGNWhite with Black — battery-feed pin of ignition switch
IGN
IGNINL_M2Black with Red — ST terminal output
INL_M2
INL_M2INL_M130Black with Red — through main-to-engine-room inline
INL_M130
INL_M130INL_GASBlack with Red — engine-room to engine harness No.2
INL_GAS
INL_GASSOLBlack with Red — to starter solenoid pull-in
NOTE
Supplement-VII M/T starter wiring. The only architectural change vs Supplement-VI is the variant tagging (GS / DI 2-letter vs the older M/MA/C). The harness path is otherwise unchanged — IGN ST terminal 5 → engine bay → starter solenoid; battery → 30A fusible link → starter motor main feed.
Engine variant determines which inline connectors carry the current: gas uses E109/E134/E27/E103-B/Y; diesel uses E110/E135/E71/E103-B/L.