EXTERIOR LAMPS — Back-up Lamp / Wiring Diagram
EL-7024wiring diagramK11 has THREE possible reverse-trigger sources depending on drivetrain: PNP switch (CVT), M/T-gasoline reverse switch (E55), M/T-diesel reverse switch (E136). The diesel-variant marker confirms K11 was available with a diesel option in some markets. Park/Neutral position-switch contact-table: column R drives the back-up output.
Back-up Lamp / Wiring Diagram
NOTE
The back-up lamp is driven from the ignition switch (ON or START) through a 10A fuse [8] in the cabin fuse block, then through one of three switch paths to the rear combination lamp back-up filaments: a park/neutral position switch (on CVT cars, closes in R), a reverse switch on M/T gasoline gearboxes, or a reverse switch on M/T diesel gearboxes.
Wiring Schematic
Components (10)
Connections (13)
IGN
IGNFUSE_8??
FUSE_8
FUSE_8FUSE_BLOCKWhite
FUSE_BLOCK
FUSE_BLOCKPNPWhite
FUSE_BLOCKREV_M_GASWhite
FUSE_BLOCKREV_M_DIESELWhite
PNP
PNPBU_RHGreen with White stripe
PNPBU_LHGreen with White stripe
REV_M_GAS
REV_M_GASBU_RHGreen with White stripe
REV_M_GASBU_LHGreen with White stripe
REV_M_DIESEL
REV_M_DIESELBU_RHGreen with White stripe
REV_M_DIESELBU_LHGreen with White stripe
BU_RH
BU_RHGND_M4Black
BU_LH
BU_LHGND_C56Black
NOTE
Variant markers in the legend: L = LHD models, R = RHD models, GS = with gasoline engine, DI = with diesel engine, C = with CVT, M = with M/T.
See also
EL — POWER SUPPLY ROUTING