WIPERS AND WASHERS — Headlamp Wiper and Washer — Wiring Diagram — For North Europe and Denmark (Supplement-VII)
EL-7050wiring diagramHeadlamp washer wiring — North Europe + Denmark trim only. Timer-limited single-shot. Same architecture as Supplement-VI.
Headlamp Wiper and Washer / Wiring Diagram
For North Europe and Denmark
NOTE
Market-specific feature — only fitted to K11 sold in North Europe (Sweden, Norway, Finland) and Denmark, where regulations require headlamp washers on cars with halogen headlamps.
The HEADLAMP WASHER TIMER is a single-shot pulse module that limits washer-pump run time to ~1 second per actuation. This prevents emptying the reservoir if the button is held.
Activation interlock:
• LIGHTING SWITCH at 2ND (headlamps on) AND
• HEADLAMP WASHER SWITCH pressed (or stalk pushed) AND
• Ignition ON
DAYTIME LIGHT CONTROL UNIT M41/M42 mediates the LG/P signals — prevents firing during DRL-only mode.
WARNING
Most K11 chassis don't have this wiring — verify trim before tracing this circuit. If the harness has connector M19 with OR/B wire but no headlamp washer motor, the connector is taped off as unused (North Europe trim removed).