INTERIOR LAMPS — Logical Lighting / Wiring Diagram — With Power Door Lock (Supplement-VI)
EL-6026wiring diagramSupplement-VI adds programmed interior-lamp behaviour via the CENTRAL DOOR LOCK CONTROL UNIT — lamp can stay on briefly after door close. Not present on Supplement-II cars without power door lock.
With Power Door Lock (Supplement-VI)
NOTE
Variant markers on this page:
• GS = With gasoline engine / DI = With diesel engine
Supplement-VI adds a 'Logical Lighting' control via the CENTRAL DOOR LOCK CONTROL UNIT on cars with power door lock. The unit gates the interior-lamp ground so the lamp can fade or have a delay after the door closes — a feature not in Supplement-II's simpler wiring.
Wiring Schematic
Components (11)
Connections (13)
BAT
BATFLBOXWhite — heavy gauge
FLBOX
FLBOXFB10AWhite with Red — 25A fused
IGN
IGNFB75Ignition-on supply
FB75
FB75CDLCUWhite with Red — IGN-on to CDLCU
FB10A
FB10ACDLCURed with Blue — battery-direct to CDLCU
CDLCU
CDLCUINTRed with White — interior lamp drive
CDLCUDRSW_DRed with Green — driver door sense
CDLCUDRSW_PRed — passenger door sense
CDLCUCBBlue — power-door-lock motor feed
CB
CBCDLCURed with Blue
INT
INTGNDBlack — lamp ground
DRSW_D
DRSW_DGNDBlack — door switch ground
DRSW_P
DRSW_PGNDBlack — door switch ground