CHARGING SYSTEM — Alternator — Construction (Base K11)

EL-35parts diagram

Base K11 CHARGING SYSTEM — alternator exploded construction view (UEL034). IC-regulator type: stator+regulator+diode are one combined assembly. Pulley nut 45-55 N·m. Brushes in connector/brush gear assembly. Leader labels only; numbers assigned for reference.

Continued from EL-34

Construction

Parts Diagram

#	Part Name	Notes
1	Pulley nut	torque 45 - 55 N·m
2	Pulley	drive pulley
3	Spacer
4	Front cover	drive-end bracket
5	Bearing (front)	drive-end bearing
6	Bearing retainer	front bearing retainer plate
7	Rotor	claw-pole rotor with slip rings
8	Bearing (rear)	slip-ring-end bearing
9	Bearing cover	rear bearing cover
10	Stator, regulator and diode assembly	combined stator winding + IC regulator + rectifier diodes
11	Connector/Brush gear assembly	brushes + regulator connector
12	Cover	rear cover
13	Through-bolts	long assembly bolts

NOTE

Exploded construction view of the IC-regulator alternator. Note that the stator, regulator and diode (rectifier) are a single combined assembly — the regulator is not separately serviceable on this unit. Pulley nut torque is 45-55 N·m. Brushes are part of the connector/brush gear assembly. Diagram uses leader-line labels; callout numbers above assigned for reference.

Support our work!

CHARGING SYSTEM — Alternator — Construction (Base K11)

Construction

Search Manual