HEADLAMP — Dim-dip Lamp System — Wiring Diagram — M/T Model (without Super Multiple Junction)
EL-47wiring diagramOn the M/T-no-SMJ variant the headlamp leads cross the main↔engine-room boundary via direct inline connectors (M3/E1 etc.) rather than passing through the S.M.J. cell. RHD/LHD aren't called out — this single page covers the M/T-no-SMJ wiring regardless of hand.
Wiring Diagram — M/T Model (without Super Multiple Junction)
NOTE
(Page rendered with text running bottom-to-top — original landscape layout.) M/T-no-SMJ variant of the dim-dip wiring: headlamp leads cross main↔engine-room harness directly through inline connectors instead of going via the S.M.J. cell.
Wiring Schematic
Components (11)
Connections (17)
BAT
BATFLBOXWhite with Green — fusible-link box feed
FLBOX
FLBOXDIMDIPRed with White — dim-dip supply
FLBOXDIMDIPRed — second dim-dip supply
IGN
IGNFB10A_ONIgnition-on supply to fuse block
FB10A_ON
FB10A_ONDIMDIPGreen with Red — dim-dip ignition-on
FB10A_ONDIMDIPYellow — second ignition-on feed
LSW
LSWDIMDIPRed with Blue — lighting-switch sense
LSWDIMDIPRed with Green — lighting-switch sense
DIMDIP
DIMDIPHRHRed with Blue — RH low beam
DIMDIPHRHRed with Green — RH high beam
DIMDIPHLHYellow with Black — LH low beam
DIMDIPHLHRed with Yellow — LH high beam
DIMDIPMETERRed with White — HIGH BEAM tell-tale (also via the high-beam lead)
DIMDIPGND_RHBlack — dim-dip unit ground
HRH
HRHGND_RHBlack — RH headlamp ground
HLH
HLHGND_RHBlack — LH headlamp ground (engine bay)
METER
METERGND_METERBlack — meter ground