NISSAN MICRA (K11) ECCS WIRING DIAGRAM — Left Half (Supplement-II Foldout)
EL-NC-ELECTRICAL-007wiring diagramSupplement-II ECCS foldout left half (rotated raster). ECM ~113-pin. Distributor ignition (vs Supplement-VII DLI). Single front O2 sensor. Scan has black artifact on right edge.
NISSAN MICRA (K11) ECCS WIRING DIAGRAM — Left Half (Supplement-II)
NOTE
Supplement-II ECCS wiring foldout — left half (page is rotated 90° in the raster). Synthetic page code (foldout, no printed page number).
Documents the CG-engine ECCS wiring. ECM (ECCS CONTROL MODULE) is a multi-pin connector with pin numbers up to 113 — larger than base K11's 48-pin ECM, closer to the Supplement-VI/VII range.
Ignition is DISTRIBUTOR-based (single distributor + ignition coil + power transistor + 4 spark plug leads) — same as base K11. Supplement-VII later switched to distributorless (4 coil packs).
CAMSHAFT POSITION SENSOR (F12) is the distributor-integrated position sensor. Single OXYGEN SENSOR (F13) — front only (Supplement-VII added rear O2 sensor).
Full pin colours and numbers are dense at downscaled resolution — use full-res raster for service-level pin lookups.
WARNING
Note: this raster page has a large black artifact down the right side (scan damage). The ECM connector + bottom-row injectors are still legible. The right side of the foldout (continuation) is on the next page.