EXTERIOR LAMPS — Clearance, License, Tail and Stop Lamps / Wiring Diagram — L.H.D. Model Without Daytime Running Lamps (Base K11)
EL-61wiring diagramBase K11 EXTERIOR LAMPS — clearance/license/tail/stop wiring, LHD no-DRL (UEL124). Lighting switch → tail/clearance/licence (R/L, OR); stop lamp switch → stop filaments (R/G) independently. Stop/tail = dual-filament rear combo bulb. SMJ E55/M59 via D14/F1. Licence on back-door harness.
Clearance, License, Tail and Stop Lamps / Wiring Diagram
L.H.D. Model — Without Daytime Running Lamps
Clearance/license/tail/stop wiring — LHD no-DRL (UEL124)
Components (12)
BatteryFusible Link Box (10A + 65A)Fuse Block (refer to Power Supply Routing)Lighting Switch (OFF/1st/2nd × A/B/C)Stop Lamp SwitchS.M.J. (refer to Foldout page) — E55/M59 via D14/F1Rear Combination Lamp R.H. (STOP + TAIL)Rear Combination Lamp L.H. (STOP + TAIL)License Plate LampClearance Lamp R.H.Clearance Lamp L.H.ground
Connections (12)
Battery
BatteryFusible Link Box (10A + 65A)White
Fusible Link Box (10A + 65A)
Fusible Link Box (10A + 65A)Fuse Block (refer to Power Supply Routing)White/Red
Fuse Block (refer to Power Supply Routing)
Fuse Block (refer to Power Supply Routing)Lighting Switch (OFF/1st/2nd × A/B/C)White/Black
Lighting Switch (OFF/1st/2nd × A/B/C)
Lighting Switch (OFF/1st/2nd × A/B/C)Rear Combination Lamp R.H. (STOP + TAIL)Red/Blue (tail)
Lighting Switch (OFF/1st/2nd × A/B/C)Rear Combination Lamp L.H. (STOP + TAIL)Red/Blue (tail)
Lighting Switch (OFF/1st/2nd × A/B/C)License Plate LampRed/Blue (tail)
Lighting Switch (OFF/1st/2nd × A/B/C)Clearance Lamp R.H.Red/Blue
Lighting Switch (OFF/1st/2nd × A/B/C)Clearance Lamp L.H.Orange
Stop Lamp Switch
Stop Lamp SwitchRear Combination Lamp R.H. (STOP + TAIL)Red/Green (stop)
Stop Lamp SwitchRear Combination Lamp L.H. (STOP + TAIL)Red/Green (stop)
Rear Combination Lamp R.H. (STOP + TAIL)
Rear Combination Lamp R.H. (STOP + TAIL)groundBlack (body ground)
Clearance Lamp R.H.
Clearance Lamp R.H.groundBlack (body ground E3/E4)
NOTE
Tail/clearance/license/stop wiring for the LHD no-DRL model. Two independent circuits share the rear combination lamps: the lighting switch (1st/2nd) feeds the TAIL filaments + clearance + licence (R/L tail line); the STOP LAMP SWITCH (brake pedal) feeds the STOP filaments (R/G) regardless of the lighting switch. Stop/tail share the 21/5W dual-filament bulb in the rear combination lamp. SMJ (E55/M59 via D14/F1) routes lines between front and rear. The license plate lamp is on the back-door harness. DRL and RHD variants are on following pages.