EXTERIOR LAMPS — Back-up Lamp / Wiring Diagram — L.H.D. Model (Base K11)
EL-64wiring diagramBase K11 EXTERIOR LAMPS — back-up lamp wiring, LHD (UEL127). Fuse block 10A (Y, ign ON/START) → reverse switch → back-up bulb in rear combo lamp RH (G/W). Switch by drivetrain: M/T 1.0L position switch, M/T 1.3L reverse switch, N·CVT inhibitor switch reverse contact. SMJ E55/M59 via C5/D5.
Back-up Lamp / Wiring Diagram
L.H.D. Model
Back-up lamp wiring — LHD (UEL127)
Components (7)
Fuse Block (10A, ignition ON or START)S.M.J. (refer to Foldout page) — E55/M59 via C5/D5Inhibitor Switch (N·CVT — P/R/N/D/Ds grid, reverse contact)Reverse Switch (M/T 1.3L)Position Switch (M/T 1.0L)Rear Combination Lamp R.H. — Back-up Lampground
Connections (7)
Fuse Block (10A, ignition ON or START)
Fuse Block (10A, ignition ON or START)Inhibitor Switch (N·CVT — P/R/N/D/Ds grid, reverse contact)Yellow (ignition ON/START feed)
Fuse Block (10A, ignition ON or START)Reverse Switch (M/T 1.3L)Yellow
Fuse Block (10A, ignition ON or START)Position Switch (M/T 1.0L)Yellow
Inhibitor Switch (N·CVT — P/R/N/D/Ds grid, reverse contact)
Inhibitor Switch (N·CVT — P/R/N/D/Ds grid, reverse contact)Rear Combination Lamp R.H. — Back-up LampGreen/White (reverse-on output)
Reverse Switch (M/T 1.3L)
Reverse Switch (M/T 1.3L)Rear Combination Lamp R.H. — Back-up LampGreen/White
Position Switch (M/T 1.0L)
Position Switch (M/T 1.0L)Rear Combination Lamp R.H. — Back-up LampGreen/White
Rear Combination Lamp R.H. — Back-up Lamp
Rear Combination Lamp R.H. — Back-up LampgroundBlack (body ground M74/M56/M10)
NOTE
Back-up (reverse) lamp wiring, LHD. Powered from the fuse block (10A, ignition ON/START, Y). The reverse-detection switch differs by drivetrain (variant legend): M/T 1.0L uses a 'position switch', M/T 1.3L uses a 'reverse switch', N·CVT uses the inhibitor switch reverse contact (from its P/R/N/D/Ds continuity grid). All output G/W to the rear combination lamp R.H. back-up bulb when reverse is selected. Routed via SMJ (E55/M59, C5/D5). RHD variant on the following page.
See also
S.M.J. Foldout page · Power Supply Routing