EXTERIOR LAMPS — Clearance, License, Tail and Stop Lamps / Wiring Diagram (Cont'd) — L.H.D. Model With Daytime Running Lamps
EL-62wiring diagramDRL controller drives both headlamps (EL-44) and rear/sidelight cluster (this page) — single unit, two outputs. Stop lamp is independent (separate fuse + brake switch).
L.H.D. Model — With Daytime Running Lamps
NOTE
(Page rendered with text running bottom-to-top — original landscape layout.) DRL variant of EL-61. Same fixtures, but the DAYTIME LIGHT CONTROL UNIT (same controller covered in detail under HEADLAMP) is inserted between the lighting switch and clearance/tail/license/high-mounted-stop bus, so the DRL unit drives the rear/sidelight cluster too — not just the headlamps. High-mounted stop lamp is shown here (it was implied but not drawn on EL-61).
Wiring Schematic
Components (19)
Connections (21)
BAT
BATFLBOXWhite — heavy gauge
FLBOX
FLBOXFB10A_aWhite with Red — fused supply to fuse block
IGN
IGNFB10A_aYellow — ignition feed
FB10A_a
FB10A_aDRLRed with Yellow — DRL supply
FB10A_b
FB10A_bDRLLight Green — second DRL feed
DRL
DRLLSWWhite with Red — DRL ↔ lighting switch
DRLREAR_RHRed with Blue — RH tail via DRL
DRLREAR_LHRed with Blue — LH tail via DRL
DRLLICRed with Blue — license plate
DRLCLR_RHRed with Blue — RH clearance
DRLCLR_LHOrange — LH clearance
LSW
LSWDRLRed with Blue — TAIL line
SLS
SLSREAR_RHRed with Green — RH stop
SLSREAR_LHRed with Green — LH stop
SLSHMSLRed with Green — high-mounted stop
REAR_RH
REAR_RHGND_REARBlack — RH rear ground
REAR_LH
REAR_LHGND_REARBlack — LH rear ground
LIC
LICGND_REARBlack — license-plate ground
HMSL
HMSLGND_REARBlack — HMSL ground
CLR_RH
CLR_RHGND_RHBlack — RH clearance ground
CLR_LH
CLR_LHGND_LHBlack — LH clearance ground