HEADLAMP — Without Daytime Light System — Wiring Diagram (Supplement-VII)
EL-7014wiring diagramNon-DRL headlamp wiring — same architecture as Supplement-VI EL-6011 but with refreshed connector IDs (M53 lighting switch shared with both supplements; E33 fuse box shared; M122 RH headlamp / E33 LH headlamp).
Wiring Diagram
Wiring Schematic
Components (9)
Connections (12)
BAT
BATF15LWhite — battery feed
BATF15RWhite — battery feed
F15L
F15LSWBlue with White — headlamp battery feed to switch
F15R
F15RSWBlue with White — headlamp battery feed to switch
SW
SWHL_RHRed with White — RH high beam
SWHL_RHRed with Yellow — RH low beam
SWHL_LHRed with Blue — LH high beam
SWHL_LHRed with Green — LH low beam
SWHBIRed with Green — high-beam indicator drive
HL_RH
HL_RHGND_EBlack — headlamp ground
HL_LH
HL_LHGND_EBlack — headlamp ground
HBI
HBIGND_MBlack — cluster ground
NOTE
Standard non-DRL headlamp circuit. Each side fused independently (15A L + 15A R in E33). LIGHTING SWITCH M53 sub-positions: 1ST = parking + tail only; 2ND = headlamp on. A/B/C within those positions split high beam / dip / flash. Wire colour scheme: L-side circuits use R/L (high) + R/G (low); R-side uses R/W (high) + R/Y (low). Single L/W wire is the battery feed entering the switch.
WARNING
Diagnose loss-of-headlamps by checking 15A fuses first — they're per-side, so a single-side failure usually points at fuse, bulb or one branch wire, not the switch.