POWER SUPPLY PROTECTION — Wiring Diagram (Cont'd) — Fuse Block Output Map (Without DRL variant) (Base K11)
EL-11wiring diagramBase K11 fuse-block output map (without-DRL variant, right-side-up). R/L wire = combined illumination/clearance/license/tail-RH/buzzer/aim-CU bus. FRONT FOG/DRIVING LAMP on OR. 3 integrated relays.
Wiring Diagram (Cont'd) — Fuse Block Output Map (Without DRL variant)
NOTE
Base K11 fuse-block output map (right-side-up; this is the without-DRL variant pairing with EL-10). Functionally the same as EL-9 but the headlamp/illumination feeds route differently (no DRL CU): R/L wire carries the combined CLEARANCE / ILLUMINATION / LICENSE PLATE / TAIL LAMP RH / LIGHTS-ON-WARNING-BUZZER / HEADLAMP AIMING CONTROL UNIT bus; OR carries TAIL LAMPS LH and FRONT FOG/DRIVING LAMP separately.
Three integrated fuse-block relays: IGNITION RELAY-2, ACCESSORY RELAY-1, IGNITION RELAY-1.
Air conditioning has a variant note 'Manual, ABS+N·CVT' — A/C circuit routing differs by transmission/ABS trim.
This page (EL-11) is right-side-up, unlike EL-9/EL-10 which were rotated 180°. The duplex foldout layout alternates orientation.