HEADLAMP — Dim-dip Lamp System — Wiring Diagram — N·CVT Model and M/T Model (with Super Multiple Junction) (Base K11)
EL-48wiring diagramBase K11 HEADLAMP — Dim-dip wiring, N·CVT / M/T-with-SMJ variant (UEL121). Same as EL-47 (UEL120) but beam lines routed through SMJ (E55/M59 via D1/E1). Headlamp RH R/G+R/L via SMJ, LH R/B+R/Y+Y/B. Pairs with EL-46 operation table.
Wiring Diagram
N·CVT Model and M/T Model (with Super Multiple Junction)
Dim-dip wiring — N·CVT / M/T-with-SMJ (UEL121)
Components (10)
BatteryFusible Link Box (15A fuse)Fuse Block (10A via ignition ON-or-START)Ignition Switch ON or STARTDim-dip Lamp Unit (terminals 1-12)Lighting Switch (OFF/1st/2nd × A/B/C)S.M.J. (refer to Foldout page) — E55/M59 via D1/E1Headlamp R.H. (R/G, R/L)Headlamp L.H. (R/B, R/Y, Y/B)Combination Meter (HIGH BEAM indicator)
Connections (11)
Fuse Block (10A via ignition ON-or-START)
Fuse Block (10A via ignition ON-or-START)Dim-dip Lamp Unit (terminals 1-12)Green/Red (ignition feed)
Dim-dip Lamp Unit (terminals 1-12)
Dim-dip Lamp Unit (terminals 1-12)Lighting Switch (OFF/1st/2nd × A/B/C)Red/White
Dim-dip Lamp Unit (terminals 1-12)S.M.J. (refer to Foldout page) — E55/M59 via D1/E1Red/Green (RH high, via SMJ)
Dim-dip Lamp Unit (terminals 1-12)S.M.J. (refer to Foldout page) — E55/M59 via D1/E1Red/Blue (RH low, via SMJ)
Dim-dip Lamp Unit (terminals 1-12)Headlamp L.H. (R/B, R/Y, Y/B)Red/Black (LH high)
Dim-dip Lamp Unit (terminals 1-12)Headlamp L.H. (R/B, R/Y, Y/B)Red/Yellow (LH low)
Dim-dip Lamp Unit (terminals 1-12)Headlamp L.H. (R/B, R/Y, Y/B)Yellow/Black (dim-dip line)
S.M.J. (refer to Foldout page) — E55/M59 via D1/E1
S.M.J. (refer to Foldout page) — E55/M59 via D1/E1Headlamp R.H. (R/G, R/L)Red/Green
S.M.J. (refer to Foldout page) — E55/M59 via D1/E1Headlamp R.H. (R/G, R/L)Red/Blue
Fusible Link Box (15A fuse)
Fusible Link Box (15A fuse)BatteryWhite/Green
Fusible Link Box (15A fuse)Dim-dip Lamp Unit (terminals 1-12)Red/White (15A fused)
NOTE
Dim-dip wiring variant for N·CVT models and M/T models EQUIPPED with the Super Multiple Junction. Functionally identical to the M/T-no-SMJ diagram (EL-47), but the headlamp beam lines are routed through the S.M.J. (E55/M59 connectors via D1/E1 — refer to the SMJ Foldout page). Headlamp RH = R/G (high) + R/L (low) via SMJ; LH = R/B (high) + R/Y (low) + Y/B (dim-dip). Dim-dip function (low beam dim as clearance when ignition ON + switch 1ST) per the EL-46 operation table.