WARNING LAMPS AND BUZZERS — Warning Buzzer / Wiring Diagram — LHD Model (M/T) (Supplement-VI)
EL-6031wiring diagramSupplement-VI's warning buzzer is in the meter — no separate buzzer module to replace if it fails. The Unified Meter Control Unit handles the timing/logic in software.
LHD Model (M/T) (Supplement-VI)
NOTE
Variant markers on this page:
• DL = With daytime light system / WD = Without daytime light system
• GS = With gasoline engine / DI = With diesel engine
Supplement-VI integrates the warning buzzer into the COMBINATION METER — the UNIFIED METER CONTROL UNIT plays the warning tones. No separate buzzer module + IGNITION RELAY-3 like Supplement-II (EL-96). Driver-side door switch + lighting switch + ignition switch feed the meter, which decides when to sound.
Wiring Schematic
Components (9)
Connections (9)
IGN
IGNFB10AIgnition feed
FB10A
FB10AMETERRed with White — buzzer power (pin 15)
FB10AMETERYellow — meter +12V (pin 20)
LSW
LSWMETERGreen with Red — lights-on sense (pin 27)
LSWMETERPurple — illumination sense
LSWMETERLight Green — lighting switch sense
DRSW_D
DRSW_DMETERGreen — driver door open
DRL
DRLMETERPurple — DRL sense (variant DL only)
METER
METERGNDBlack — meter ground