Starting System - Starter - Starter Motor / Removal and Installation
EL-27prose procedureStarter Motor
NOTE
There are four basic models of starter motor, dependent on market application, engine size and N·CVT or manual transmission:
Starter motor variants
12 V 0.9 kW
M/TCG10DE / CG13DE
N·CVT—
12 V 1.1 kW
M/TCG13DE (Market Specific)
N·CVT—
12 V 0.9 kW
M/T—
N·CVTCG10DE / CG13DE
12 V 0.9 kW
M/T—
N·CVTCG10DE (Market Specific) / CG13DE (Market Specific)
NOTE
• Ensure correct starter motor is used when replacing.
• Note that manual and N·CVT starter motors have different front brackets and fixings and cannot be interchanged.
REMOVAL AND INSTALLATION
Removal - Manual Transmission
- 1Remove battery negative cable from battery.
- 2Remove battery cable from starter motor.
- 3Disconnect harness connector from starter motor harness.
- 4Remove starter motor mounting bolts.
- 5Remove starter motor.
| Specification | Value |
|---|---|
| Mounting bolts (2 off) | 31.4 - 42.2N·m |
| Terminal Nut | 12.7 - 15.6N·m |
Mounting bolts (2 off)
31.4 - 42.2N·m
Terminal Nut
12.7 - 15.6N·m