WARNING LAMPS AND BUZZERS — Warning Lamps / Schematic
EL-92wiring diagramUnverifiedBrake warning lamp is wire-OR'd between parking-brake switch and brake-fluid-level switch — either will light the lamp. This is why a 'brake' warning sometimes means a low brake-fluid level rather than the handbrake being on. Worth checking both before condemning the lamp.
Warning Lamps / Schematic
NOTE
Variant markers on this page:
• A.B.S. = Anti-lock braking system equipped models
• N·CVT = N·CVT equipped models
Six dash warning lamps share a single ignition-switched fuse rail; each is driven low (i.e. ground-side) by its respective sensor/control unit. ABS and N·CVT lamps are present only on equipped models. BRAKES lamp is wire-OR'd between two switches (parking brake + brake fluid level).
Wiring Schematic
Components (16)
Connections (14)
IGN
IGNFUSEIgnition feed
FUSE
FUSEABS_LMPWarning rail +
FUSECVT_LMPWarning rail +
FUSEFUEL_LMPWarning rail +
FUSEOIL_LMPWarning rail +
FUSEBRK_LMPWarning rail +
FUSECHG_LMPWarning rail +
ABS_LMP
ABS_LMPABS_CUGround-side drive
CVT_LMP
CVT_LMPCVT_CUGround-side drive
FUEL_LMP
FUEL_LMPFTGround-side drive
OIL_LMP
OIL_LMPOPSGround-side drive
BRK_LMP
BRK_LMPPBRGround via parking brake switch
BRK_LMPBFLGround via brake fluid level switch (parallel)
CHG_LMP
CHG_LMPALTAlternator L pin (ground when not charging)