STARTING SYSTEM — Starter Motor Assembly / Service Data and Specifications (S.D.S.)
EL-32spec tableBrush spring tension upper bound printed differently between 0.9 kW (5.67 lb) and 1.1 kW (5.62 lb) — likely a typo in one column, but captured as-printed per never-guess rule.
STARTING SYSTEM — Starter —
Starter Motor — Assembly
NOTE
Assembly is the reverse process to disassembly.
• Apply high-temperature grease to lubricate the bearing, gears and pinion shaft when assembling the starter.
Service Data and Specifications (S.D.S.) — STARTER
Rating
UnitkW
0.9 kW starter0.9
1.1 kW starter1.1
System voltage
UnitV
0.9 kW starter12
1.1 kW starter12
No-load voltage
UnitV
0.9 kW starter11.5
1.1 kW starter11
Current (maximum)
UnitA
0.9 kW starter50
1.1 kW starter75
Revolution
Unitrpm
0.9 kW starter4900
1.1 kW starter2700
Minimum diameter of commutator
Unitmm (in)
0.9 kW starter28.8 (1.134)
1.1 kW starter28.8 (1.134)
Minimum length of brushes
Unitmm (in)
0.9 kW starter5 (0.2)
1.1 kW starter5 (0.2)
Brush spring tension
UnitN (kg, lb)
0.9 kW starter14.3 - 25.2 (1.46 - 2.57, 3.22 - 5.67)
1.1 kW starter14.3 - 25.2 (1.46 - 2.57, 3.22 - 5.62)
Clearance "ℓ" between pinion front edge and pinion stopper (M/T)
Unitmm
0.9 kW starter0 - 0.45
1.1 kW starter0 - 0.45
Clearance "ℓ" between pinion front edge and pinion stopper (N·CVT)
Unitmm
0.9 kW starter0 - 0.6
1.1 kW starter0 - 0.6