HEADLAMP — Dim-dip Lamp System — Wiring Diagram
EL-1013wiring diagramDim-dip lamp system wiring — R.H.D. EU-spec variant. Ⓐ denotes ABS-only branches.
Wiring Diagram
NOTE
Legend: Ⓐ : Models equipped with anti-lock brake system.
Wiring Schematic
Components (21)
BatteryFusible Link Box (with 15A FUSE)Fuse Block (10A × 2, refer to power supply routing)Ignition Switch (ON or START)Dim-Dip Lamp UnitLighting SwitchCombination Meter — High BeamHeadlamp R.H.Headlamp L.H.Super Multiple JunctionConnector M59Connector M3Body Ground M64Body Ground M65Body Ground M58Body Ground M10Connector E55Connector E1Connector E3Body Ground E4??
Connections (18)
Battery
Battery:+Fusible Link Box (with 15A FUSE):??White with Green stripe
Fusible Link Box (with 15A FUSE)
Fusible Link Box (with 15A FUSE):??Fuse Block (10A × 2, refer to power supply routing):??White with Red stripe
Fuse Block (10A × 2, refer to power supply routing)
Fuse Block (10A × 2, refer to power supply routing):??Ignition Switch (ON or START):??Green with Red stripe
Fuse Block (10A × 2, refer to power supply routing):??Dim-Dip Lamp Unit:??Yellow
Dim-Dip Lamp Unit
Dim-Dip Lamp Unit:1Lighting Switch:??Red with Blue stripe
Dim-Dip Lamp Unit:4Lighting Switch:??Red with Blue stripe
Dim-Dip Lamp Unit:9Lighting Switch:??Red with Yellow stripe
Dim-Dip Lamp Unit:10??:??Black
Dim-Dip Lamp Unit:2Headlamp L.H.:??Red with White stripe
Dim-Dip Lamp Unit:5??:??Yellow
Dim-Dip Lamp Unit:3Headlamp R.H.:??Red with Green stripe
Dim-Dip Lamp Unit:7??:??Yellow with Black stripe
Dim-Dip Lamp Unit:8??:??Purple
Super Multiple Junction
Super Multiple Junction:D1Lighting Switch:??Red with Green stripe
Super Multiple Junction:E1Lighting Switch:??Red with Blue stripe
Combination Meter — High Beam
Combination Meter — High Beam:??Lighting Switch:??Red with Green stripe
Headlamp R.H.
Headlamp R.H.:??Body Ground E4:??Black
Headlamp L.H.
Headlamp L.H.:??Body Ground M64:??Black
NOTE
DIM-DIP LAMP UNIT outgoing wire colours: R/L (pin 1), R/L (pin 4), R/Y (pin 9), R/B (pin 10), R/W (pin 2), Y (pin 5), R/G (pin 3), Y/B (pin 7), PU (pin 8) — second cluster — and an additional R/W input from S.M.J. side. Lighting-switch matrix: OFF/1st/2nd × A/B/C, rows 5, 5a, 6, 7, 8, 9, 10, 11, 12.