EXTERIOR LAMPS — Clearance, License, Tail and Stop Lamps / Wiring Diagram — LHD Model With Daytime Light System (Supplement-VI)
EL-6017wiring diagramSupplement-VI rear/sidelight wiring with DRL — busier than EL-62 because of the new CONNECTOR M14 + M139 fuse-distribution layer. Stop lamp switch M47 fans out to three stop filaments (RH/LH rear combos + high-mounted).
LHD Model — With Daytime Light System (Supplement-VI)
NOTE
Supplement-VI's LHD-with-DRL rear-lamp circuit. Uses CONNECTOR M14 as the new fuse-distribution hub (cells 42U/7U/34U/33U/44U) plus M139 (10V) for the DRL feed. DRL control unit is the same as EL-6009. STOP LAMP SWITCH M47 sends R/G to all stop filaments (including high-mounted and rear combination lamps).
Wiring Schematic
Components (17)
Connections (22)
BAT
BATFLBOXWhite — heavy gauge
FLBOX
FLBOXFB10A_14White with Blue — fused
IGN
IGNFB10A_8Ignition-on supply
FB10A_14
FB10A_14DRLRed with Yellow (cell 42U)
FB10A_14DRLBlue (cell 7U)
FB10A_8
FB10A_8DRLBrown with Red (cell 34U)
LSW
LSWDRLLight Green — lighting sense
LSWDRLGreen with Red — lighting sense
DRL
DRLREAR_RHRed with Blue — RH tail
DRLREAR_LHRed with Blue — LH tail
DRLLICRed with Blue — licence plate
DRLCLR_RHPurple — RH clearance (CONNECTOR E56 cell 3W)
DRLCLR_LHBlue — LH clearance (CONNECTOR E56 cell 2W)
SLS
SLSREAR_RHRed with Green — RH stop
SLSREAR_LHRed with Green — LH stop
SLSHMSLRed with Green — high-mounted stop
REAR_RH
REAR_RHGND_METERBlack
REAR_LH
REAR_LHGND_METERBlack
LIC
LICGND_REARBlack
HMSL
HMSLGND_REARBlack
CLR_RH
CLR_RHGND_LHBlack
CLR_LH
CLR_LHGND_LHBlack