EXTERIOR LAMPS — Clearance, License, Tail and Stop Lamps / Wiring Diagram (Cont'd) — L.H.D. Model With Daytime Running Lamps (Base K11)
EL-62wiring diagramBase K11 EXTERIOR LAMPS — clearance/license/tail/stop wiring, LHD WITH DRL (UEL125). DRL control unit inserted in tail/clearance feed (auto-on with DRL). Stop circuit (stop switch→R/G→rear stop + high-mounted stop) independent. High-mounted stop + licence on back-door harness. Cf EL-61 (no-DRL).
Clearance, License, Tail and Stop Lamps / Wiring Diagram (Cont'd)
L.H.D. Model — With Daytime Running Lamps
Clearance/license/tail/stop wiring — LHD with DRL (UEL125)
Components (15)
BatteryFusible Link Box (10A + 65A)Fuse Block (refer to Power Supply Routing)Ignition Switch ON or STARTDaytime Light Control Unit (refer to HEADLAMP, terminals 1-12)Lighting Switch (OFF/1st/2nd × A/B/C)Stop Lamp SwitchS.M.J. (refer to Foldout page) — E55/M59 via D14/F1Rear Combination Lamp R.H. (STOP + TAIL)Rear Combination Lamp L.H. (STOP + TAIL)High-Mounted Stop LampLicense Plate LampClearance Lamp R.H.Clearance Lamp L.H.ground
Connections (10)
Fuse Block (refer to Power Supply Routing)
Fuse Block (refer to Power Supply Routing)Daytime Light Control Unit (refer to HEADLAMP, terminals 1-12)Red/Yellow (ignition feed)
Daytime Light Control Unit (refer to HEADLAMP, terminals 1-12)
Daytime Light Control Unit (refer to HEADLAMP, terminals 1-12)Lighting Switch (OFF/1st/2nd × A/B/C)Light Green
Daytime Light Control Unit (refer to HEADLAMP, terminals 1-12)Lighting Switch (OFF/1st/2nd × A/B/C)White/Red
Lighting Switch (OFF/1st/2nd × A/B/C)
Lighting Switch (OFF/1st/2nd × A/B/C)Rear Combination Lamp R.H. (STOP + TAIL)Red/Blue (tail)
Lighting Switch (OFF/1st/2nd × A/B/C)License Plate LampRed/Blue (tail)
Lighting Switch (OFF/1st/2nd × A/B/C)Clearance Lamp R.H.Red/Blue
Lighting Switch (OFF/1st/2nd × A/B/C)Clearance Lamp L.H.Orange
Stop Lamp Switch
Stop Lamp SwitchRear Combination Lamp R.H. (STOP + TAIL)Red/Green (stop)
Stop Lamp SwitchHigh-Mounted Stop LampRed/Green (high-mounted stop)
Rear Combination Lamp R.H. (STOP + TAIL)
Rear Combination Lamp R.H. (STOP + TAIL)groundBlack (body ground)
NOTE
Same tail/clearance/license/stop wiring as EL-61 but for the LHD model WITH daytime running lamps: the Daytime Light Control Unit (refer to HEADLAMP page, terminals 1-12) is inserted in the tail/clearance feed so those lamps auto-illuminate with the DRL when the engine runs. The stop circuit (stop lamp switch → R/G → rear combination stop filaments + high-mounted stop lamp) is unchanged and independent of the DRL/lighting switch. High-mounted stop + licence plate lamps are on the back-door harness.