HARNESS CONNECTORS — Description (Base K11)
EL-2prose procedureGeneric harness-connector release-technique reference (base K11). Caution: never pull the harness to disconnect — always push/lift the locking tab. Applies to all sections.
Description
HARNESS CONNECTORS
• All harness connectors have been designed to prevent accidental looseness or disconnection.
• The connector can be disconnected by pushing or lifting the locking section.
CAUTION
Do not pull the harness when disconnecting the connector.
NOTE
[Example] Seven connector types shown with their release method:
• Terminal-retainer multi-pin connector — PUSH the retainer
• Water-proof type (with rubber packing) — PUSH locking section
• Small connectors — LIFT or PUSH the tab
• Combination meter connector — PUSH from both sides
• Relay connector — PUSH the tab
Generic reference page for connector handling — applies to all wiring-diagram work in the chapter.