EXTERIOR LAMPS — Turn Signal and Hazard Warning Lamps / Wiring Diagram (Cont'd) — R.H.D. Model
EL-74wiring diagramRHD variant — same functional design as LHD. SMJ vs no-SMJ split affects which inline connectors are used, not the lamp wiring.
R.H.D. Model
NOTE
Variant markers on this page:
• M/T = Manual transaxle models (no SMJ — direct inline)
• N·CVT = N·CVT models (via S.M.J. cell A6)
Functionally identical to the LHD page (EL-73). Same combination flasher unit, hazard switch, turn-signal switch, dash tell-tales, and lamp fixtures.
Wiring Schematic
Components (19)
Connections (20)
BAT
BATFB10A_bHazard feed (always live)
IGN
IGNFB10A_aTurn signal feed (IGN-ON)
FB10A_a
FB10A_aCFUGreen — flasher power
FB10A_b
FB10A_bHSWGreen with White — hazard battery feed
HSW
HSWCFUGreen with Red — hazard tap
CFU
CFUTSWLight Green with Black — flasher output
TSW
TSWFRT_RHGreen with Yellow — RH turn signal
TSWREAR_RHGreen with Yellow — RH rear turn
TSWMET_RHGreen with Yellow — RH meter tell-tale
TSWSID_RHGreen with Yellow — RH side repeater
TSWFRT_LHGreen with Black — LH turn signal
TSWREAR_LHGreen with Black — LH rear turn
TSWMET_LHGreen with Black — LH meter tell-tale
TSWSID_LHGreen with Black — LH side repeater
FRT_RH
FRT_RHGND_RHBlack — RH front turn ground
FRT_LH
FRT_LHGND_LHBlack — LH front turn ground
REAR_RH
REAR_RHGND_METERBlack — RH rear turn ground
REAR_LH
REAR_LHGND_METERBlack — LH rear turn ground
SID_RH
SID_RHGND_RHBlack — RH side repeater ground
SID_LH
SID_LHGND_LHBlack — LH side repeater ground
See also
Foldout page (S.M.J.)