EXTERIOR LAMPS — Back-up Lamp / Wiring Diagram (Cont'd) — R.H.D. Model (Base K11)
EL-65wiring diagramBase K11 EXTERIOR LAMPS — back-up lamp wiring, RHD (UEL128). Same as LHD (EL-64) but back-up bulb in rear combo lamp LH (mirrored). Fuse block 10A (Y) → reverse switch (N·CVT inhibitor / M/T 1.3L reverse / M/T 1.0L position) → G/W → bulb.
Back-up Lamp / Wiring Diagram (Cont'd)
R.H.D. Model
Back-up lamp wiring — RHD (UEL128)
Components (7)
Fuse Block (10A, ignition ON or START)S.M.J. / connectors E3/M1Inhibitor Switch (N·CVT — P/R/N/D/Ds, reverse contact)Reverse Switch (M/T 1.3L)Position Switch (M/T 1.0L)Rear Combination Lamp L.H. — Back-up Lampground
Connections (7)
Fuse Block (10A, ignition ON or START)
Fuse Block (10A, ignition ON or START)Inhibitor Switch (N·CVT — P/R/N/D/Ds, reverse contact)Yellow (ignition ON/START feed)
Fuse Block (10A, ignition ON or START)Reverse Switch (M/T 1.3L)Yellow
Fuse Block (10A, ignition ON or START)Position Switch (M/T 1.0L)Yellow
Inhibitor Switch (N·CVT — P/R/N/D/Ds, reverse contact)
Inhibitor Switch (N·CVT — P/R/N/D/Ds, reverse contact)Rear Combination Lamp L.H. — Back-up LampGreen/White (reverse-on output)
Reverse Switch (M/T 1.3L)
Reverse Switch (M/T 1.3L)Rear Combination Lamp L.H. — Back-up LampGreen/White
Position Switch (M/T 1.0L)
Position Switch (M/T 1.0L)Rear Combination Lamp L.H. — Back-up LampGreen/White
Rear Combination Lamp L.H. — Back-up Lamp
Rear Combination Lamp L.H. — Back-up LampgroundBlack (body ground M74/M56/M10)
NOTE
RHD back-up lamp wiring (cf EL-64 LHD). Identical circuit logic — fuse block 10A (Y, ignition ON/START) → drivetrain-specific reverse switch (N·CVT inhibitor switch reverse contact / M/T 1.3L reverse switch / M/T 1.0L position switch) → G/W to the back-up bulb. Difference from LHD: the back-up bulb is in the rear combination lamp L.H. (vs R.H. on LHD), reflecting the mirrored rear-lamp bulb layout from EL-59. SMJ connectors E3/M1.
See also
S.M.J. Foldout page · Power Supply Routing