Nissan Micra K11 silhouetteK11

CHARGING SYSTEM - ALTERNATOR - Refitting / Disassembly / SDS

EL-7010spec table

CHARGING SYSTEM — ALTERNATOR —

Alternator — Refitting

Upper Fixing bolt
16-21N·m
Upper Fixing bolt torque (kg-m)
16 - 21N·m
Upper Fixing bolt torque (ft-lb)
16 - 20N·m
Adjusting plate bolt
16-21N·m
Adjusting plate bolt torque (kg-m)
16 - 21N·m
Adjusting plate bolt torque (ft-lb)
16 - 20N·m
Alternator Securing bolt
30-40N·m
Alternator Securing bolt torque (kg-m)
30 - 40N·m
Alternator Securing bolt torque (ft-lb)
30 - 41N·m
Lower fixing bolt
30-40N·m
Lower fixing bolt torque (kg-m)
30 - 40N·m
Lower fixing bolt torque (ft-lb)
30 - 41N·m

Alternator — Disassembly

Service Data and Specifications (S.D.S.)

ALTERNATOR

Type
ValueLR165-714
Make
ValueHITACHI
Applied model
ValueCG engine
Nominal rating V-A
Value12-65
Ground polarity
ValueNegative
Minimum revolutions under no-load (When 13.5V is applied) rpm
ValueLess than 1,000
Hot output current (When 13.5V is applied) A/rpm
ValueMore than 17/1,300 ; More than 48/2,500 ; More than 62/5,000
Regulated output voltage V
Value14.1-14.7
Minimum length of brush mm (in)
ValueMore than 6.0 (0.236)
Brush spring pressure N (g, oz)
Value1.0-3.43 (102-350, 3.60-12.34)
Slip ring minimum diameter mm (in)
ValueMore than 26.0 (1.024)
Rotor coil resistance at 20°C (68°F) Ω
Value2.67

Search Manual

Search pages, specs, and procedures