HORN, CIGARETTE LIGHTER AND CLOCK - Horn, Horn Switch, Cigarette Lighter, Clock - Replacement
EL-113prose procedureHorn — Replacement
- 1Remove fixing bolt (13 mm).
- 2Disconnect connector from horn.
- 3Refit new horn in reverse order to removal procedure and test operation.
NOTE
For vehicles containing two horns (high note and low note) ensure correct horn is replaced. Pitch can be changed using adjusting bolt (5.5 mm) in back of horn.
Horn Switch — Replacement
- 1Pull horn pad from steering wheel.
- 2Disconnect connectors from switch at back of horn pad.
- 3Replace horn pad by press fitting to steering wheel and test operation.
Cigarette Lighter — Replacement
- 1Remove instrument centre console front fascia (Refer to BF Section).
- 2Prise defective case from fascia.
- 3Push fit replacement lighter assembly into instrument panel, the case is retained in place by plastic clips of ring.
- 4Test operation.
NOTE
The cigarette lighter knob and case assembly may be replaced as separate items. The lighter illumination bulb is not replaceable, unit must be changed.
Clock
NOTE
The clock is an integral part of the tachometer or coolant temperature gauge refer to "Meter and Gauges" section for details of replacement.