Nissan Micra K11 silhouetteK11

EXTERIOR LAMPS — Driving/Fog Lamp — Bulb Replacement, Replacement, Aiming (Base K11)

EL-66prose procedure

Base K11 EXTERIOR LAMPS — driving/fog lamp bulb (H4 12V 55W, twist+pull, sealing cap orientation critical) + replacement + aiming (top screw vertical, top+bottom horizontal, don't cover lens). Bumper-mounted, finisher captive screw. Figs UEL164-166.

Driving/Fog Lamp — Bulb Replacement

Driving/fog lamp bulb replacement

  1. 1
    Remove battery negative cable from battery.
  2. 2
    Remove Driving/Fog Lamp finisher by unscrewing captive screw.
  3. 3
    Unscrew lamp from bumper.
  4. 4
    Twist lamp out of bumper.
  5. 5
    Twist and pull out sealing cap from back of unit.
  6. 6
    Release bulb securing clip.
  7. 7
    Disconnect defective bulb and replace.

Driving/Fog Lamp — Replacement

Driving/fog lamp replacement

  1. 1
    Remove battery negative cable from battery.
  2. 2
    Remove Driving/Fog Lamp finisher by unscrewing captive screw.
  3. 3
    Unscrew lamp from bumper.
  4. 4
    Twist lamp out of bumper.
  5. 5
    Remove connector from bumper stud.
  6. 6
    Disconnect lamp from harness and remove.

Driving/Fog Lamp — Aiming

Driving/fog lamp aiming

  1. 1
    Remove Driving/Fog Lamp finisher by unscrewing captive screw.
  2. 2
    Adjust vertical aim by turning the top aiming screw.
  3. 3
    Adjust horizontal aim by turning both the top and bottom aiming screws in the same direction.

Search Manual

Search pages, specs, and procedures