EXTERIOR LAMPS — Front Fog Lamp / Wiring Diagram
EL-7026wiring diagramSeries-AND interlock: lighting switch MUST be in 1ST or 2ND for the fog-lamp relay coil ground to be available. This is the classic European-spec wiring to prevent fog-only operation.
Front Fog Lamp / Wiring Diagram
NOTE
Front fog-lamp circuit: battery feeds both the relay coil (via the cabin fuse block 15A fuse [5]) and the relay common (via the engine-bay 10A fuse). The relay coil is grounded by series-wiring the lighting switch (must be in 1ST or 2ND) AND the fog-lamp switch (FRONT or FRONT AND REAR). Relay output drives the front fog lamps RH/LH and the dashboard FRONT FOG indicator in the combination meter.
Wiring Schematic
Components (11)
Connections (13)
BAT
BATFUSE_BLOCK??
BATFUSE_10AWhite
FUSE_BLOCK
FUSE_BLOCKFUSE_5??
FUSE_5
FUSE_5FOG_RELAYOrange — relay coil supply
FUSE_10A
FUSE_10AFOG_RELAYGreen with Red stripe — relay common
FOG_RELAY
FOG_RELAYLIGHT_SWBrown — coil ground side
FOG_RELAYFOG_RHLight Green
FOG_RELAYFOG_LHLight Green with Black stripe
FOG_RELAYMETERBrown — indicator branch
LIGHT_SW
LIGHT_SWFOG_SWBrown
FOG_SW
FOG_SWGNDBlack
FOG_RH
FOG_RHGNDBlack
FOG_LH
FOG_LHGNDBlack
NOTE
Legend on diagram: L = LHD, R = RHD, GS = gasoline, DI = diesel. The 'FRONT AND REAR' fog-lamp-switch position appears on this circuit but the rear-fog branch (RF contact) is wired on the next page.
See also
EL — POWER SUPPLY ROUTING