WIPERS AND WASHERS - Washer Nozzle Adjustment/Replacement and Check Valve
EL-109prose procedureWasher Nozzle — Adjustment
NOTE
Adjust front and rear washer nozzles with a suitable tool. Each nozzle has two jets which should be set to provide water at the specified aiming points.
| Specification | Value |
|---|---|
| Front Washer nozzles output volume | 250 cm³/sec. |
| Rear Washer nozzle output volume | 150 cm³/sec. |
Front Washer nozzles output volume
250 cm³/sec.
Rear Washer nozzle output volume
150 cm³/sec.
Washer Nozzle — Replacement
- 1To remove washer nozzle pull tubing off of check valve, pinch fixing lugs and push nozzle through bonnet aperture.
- 2Push fit new nozzle, taking care not to damage surrounding paint.
- 3Adjust nozzle to give correct spray pattern.
Check Valve
NOTE
A check valve is provided in the washer fluid line. Be careful not to connect check valve in the wrong direction.