EXTERIOR LAMPS — Driving Lamp / Wiring Diagram — L.H.D. Model
EL-67wiring diagramDriving lamps only operate with HIGH BEAM + side lights (the lighting-switch matrix lights pin gate for R/G is only set in the 2nd-position + main-beam combination). The relay isolates them from the headlamp circuit so they don't drag on dipped beam.
L.H.D. Model
NOTE
(Page rendered with text running bottom-to-top — original landscape layout.) Driving lamps are relay-controlled — the lighting switch only carries the relay coil current; the heavy bulb current goes through the DRIVING LAMP RELAY directly off the 15A fuse.
Wiring Schematic
Components (10)
Connections (11)
BAT
BATFLBOXWhite with Green — heavy gauge
FLBOX
FLBOXRELWhite with Blue — relay common
FLBOXFBRed with White — to fuse block
FB
FBLSWOrange — lighting-switch supply
LSW
LSWRELRed with Green — relay coil drive (HIGH BEAM + side lights)
REL
RELSMJLight Green — relay output to driving lamps
RELGND_RHBlack — relay coil ground
SMJ
SMJDR_RHLight Green — RH driving lamp (via engine room R.H. inline E1/M3)
SMJDR_LHLight Green — LH driving lamp (via engine room L.H. inline E3/M1)
DR_RH
DR_RHGND_RHBlack — RH driving-lamp ground
DR_LH
DR_LHGND_LHBlack — LH driving-lamp ground
See also
Foldout page (S.M.J.)