HEADLAMP — Daytime Light System — Wiring Diagram (Supplement-VI)
EL-6009wiring diagramConnector IDs differ from Supplement-II (M122 vs E20 for RH headlamp, etc.) — these are the later-K11 designators.
NOTE
Supplement-VI DRL wiring — refreshed connector IDs and pin layouts vs the earlier EL-44. Still uses the same DAYTIME LIGHT CONTROL UNIT but with new 12-pin connector (M41 + M42) and an intermediate fuse-distribution CONNECTOR (M14) carrying 10A + 7.5A fuses. Lighting-switch matrix unchanged.
Wiring Schematic
Components (13)
Connections (18)
BAT
BATFLBOXWhite — heavy gauge
FLBOX
FLBOXDRLWhite with Blue — fused supply
IGN
IGNFB10AIgnition feed
FB10A
FB10ADRLGreen with Yellow — ignition-on feed
FB75
FB75DRLGreen with Yellow — second feed
LSW
LSWDRLRed with Green — lighting switch sense
LSWDRLRed with Blue — lighting switch sense
LSWDRLRed with Yellow — lighting switch sense
DRL
DRLHRHRed with Yellow — RH high beam
DRLHRHRed — RH low beam
DRLSMJRed with Black — to LH path
DRLSMJRed with Yellow — to LH path
DRLMETERRed with Green — CHARGE / HIGH BEAM tell-tale tap
SMJ
SMJHLHRed with Yellow — LH headlamp
SMJHLHRed with Black — LH headlamp
HRH
HRHGND_METERBlack — RH headlamp ground
HLH
HLHGND_LHBlack — LH headlamp ground
METER
METERGND_METERBlack — meter ground