EXTERIOR LAMPS — Rear Fog Lamp / Wiring Diagram
EL-7028wiring diagramRear-fog filament is part of the rear combination lamp (M15/M17 connectors), not a discrete lamp. Cars without front fog (WF) still wire the rear-fog circuit, just bypassing the FF branch.
Rear Fog Lamp / Wiring Diagram
NOTE
Rear fog branch: battery feeds the fusible-link box and a 10A fuse; the output is gated by the lighting switch (must be in 1ST or 2ND) AND the fog-lamp switch in 'FRONT AND REAR' (RF contact). Output drives the rear-fog filaments inside the LH (M17) and RH (M15) rear combination lamps, and the dashboard REAR FOG indicator in the combination meter (pin 24).
Wiring Schematic
Components (9)
Connections (9)
BAT
BATFL_BOXWhite
FL_BOX
FL_BOXFUSE_10A??
FUSE_10A
FUSE_10ALIGHT_SWGreen with Red stripe
LIGHT_SW
LIGHT_SWFOG_SWBlue with White stripe
FOG_SW
FOG_SWRF_LHGreen with White stripe (RF contact)
FOG_SWRF_RHGreen with White stripe (RF contact)
FOG_SWMETERGreen with White stripe — REAR FOG indicator
RF_LH
RF_LHGNDBlack
RF_RH
RF_RHGNDBlack
NOTE
Legend on diagram: FF = With front fog lamp, WF = Without front fog lamp — these flag which branches are populated on cars without a front fog option. Rear-fog operation still requires the lighting switch in 1ST or 2ND.
See also
EL — POWER SUPPLY ROUTING