HORN, CIGARETTE LIGHTER AND CLOCK — Wiring Diagram — L.H.D. Model
EL-114wiring diagramThree-circuit page — single horn relay drives both horns in parallel; horn switch grounds the coil (saves a heavy current rotating contact in the steering wheel).
L.H.D. Model
NOTE
Single page covers three independent circuits sharing the fuse block:
• Cigarette lighter (15A always-live + illumination from TAIL bus)
• Combination-meter digital clock (10A IGN-on + illumination)
• Horn (10A always-live → relay → two horns in parallel)
Horn relay is energised by ground-side switching (horn switch grounds the coil).
Wiring Schematic
Components (13)
Connections (15)
BAT
BATFB15AAlways-live supply
FB15A
FB15ACIGOrange with Black — cig lighter +12V
IGN
IGNFB10A_clkACC/ON ignition feed
FB10A_clk
FB10A_clkCLKRed with Black — clock supply
FB10A_illum
FB10A_illumCIGRed with Blue — illumination
FB10A_illumCLKBlue with Black — clock illumination
FB10A_horn
FB10A_hornRELGreen with Black — horn-relay supply
HSW
HSWRELGreen with White — relay coil drive (ground-side)
REL
RELHRN_LGreen — horn LOW
RELHRN_HGreen — horn HIGH
RELGNDBlack
HRN_L
HRN_LGNDBlack
HRN_H
HRN_HGNDBlack
CIG
CIGGNDBlack
CLK
CLKGNDBlack