EXTERIOR LAMPS — Turn Signal and Hazard Warning Lamps / Wiring Diagram — L.H.D. Model (Base K11)
EL-73wiring diagramBase K11 EXTERIOR LAMPS — turn signal + hazard wiring, LHD (UEL135). Combination flasher unit drives turn circuit (turn switch R/N/L, ignition-fed) + hazard circuit (hazard switch, battery-fed). RH=G/Y, LH=G/B → front/side/rear turn lamps + meter indicators. SMJ E55/M59 via F8.
Turn Signal and Hazard Warning Lamps / Wiring Diagram
L.H.D. Model
Turn signal + hazard wiring — LHD (UEL135)
Components (14)
BatteryFuse Block (10A)Ignition Switch ON or STARTCombination Flasher UnitHazard Switch (OFF/ON, terminals 1-8)Turn Signal Switch (R/N/L, in combination switch)S.M.J. (refer to Foldout page) — E55/M59 via F8Front Turn Signal Lamp R.H.Front Turn Signal Lamp L.H.Side Turn Signal Lamp R.H.Side Turn Signal Lamp L.H.Rear Combination Lamp R.H. (turn)Rear Combination Lamp L.H. (turn)Combination Meter (turn indicators RH/LH)
Connections (10)
Fuse Block (10A)
Fuse Block (10A)Combination Flasher UnitGreen
Combination Flasher Unit
Combination Flasher UnitHazard Switch (OFF/ON, terminals 1-8)Green/Red
Combination Flasher UnitTurn Signal Switch (R/N/L, in combination switch)Light Green/Black
Turn Signal Switch (R/N/L, in combination switch)
Turn Signal Switch (R/N/L, in combination switch)Front Turn Signal Lamp R.H.Green/Yellow (RH turn)
Turn Signal Switch (R/N/L, in combination switch)Side Turn Signal Lamp R.H.Green/Yellow (RH)
Turn Signal Switch (R/N/L, in combination switch)Rear Combination Lamp R.H. (turn)Green/Yellow (RH)
Turn Signal Switch (R/N/L, in combination switch)Front Turn Signal Lamp L.H.Green/Black (LH turn)
Turn Signal Switch (R/N/L, in combination switch)Side Turn Signal Lamp L.H.Green/Black (LH)
Turn Signal Switch (R/N/L, in combination switch)Rear Combination Lamp L.H. (turn)Green/Black (LH)
Turn Signal Switch (R/N/L, in combination switch)Combination Meter (turn indicators RH/LH)Green/Yellow + Green/Black (indicators)
NOTE
Turn signal + hazard wiring, LHD. The combination flasher unit pulses both the turn-signal circuit (via the turn signal switch R/N/L in the combination switch, ignition-fed) and the hazard circuit (via the hazard switch, battery-fed so it works with ignition off). RH side = G/Y, LH side = G/B, driving front + side + rear turn lamps and the combination meter turn indicators in unison. SMJ routing via E55/M59 (F8). RHD variant follows.
See also
S.M.J. Foldout page · Power Supply Routing