ECCS WIRING DIAGRAM — Nissan Micra (K11 LHD Models) — Left Half (Supplement-VI)
EL-NC-ELECTRICAL_2-001wiring diagramFoldout left half. Right half follows. Compare to Supplement-II ECCS wiring (EL-7050+) — same architecture but Supplement-VI adds NATS authorisation line (P/B → ECM pin 26).
NOTE
This is the left half of an oversized foldout ECCS schematic. The right half continues on the next page. Synthetic page code `EL-NC-ELECTRICAL_2-001` because the foldout has no printed page number.
The diagram covers all ECM-managed sensors and actuators on the gasoline CG10/CG13 engine in Supplement-VI trim. Top row = sensors and actuators, bottom row = ignition system + grounds. ECM F17 is the connector at left, pin numbers along the connector body.
WARNING
Wire colours and pin numbers on this foldout are dense and partially illegible at downscaled resolution. Use the full-resolution raster (300 dpi) for ECCS-pinpoint diagnosis — every line on this page is critical.