DTC P0110 INTAKE AIR TEMPERATURE SENSOR; Component Description; On Board Diagnosis Logic
EF & EC-7082spec tableReference data table source shows a single row '25 (77) / Between 0.09 and 43' — the resistance range looks unrealistically wide (graph shows ~0.3 kΩ at 25°C). Captured verbatim. CAUTION typos 'grond' and 'transistor' singular preserved verbatim from source.
CG10, CGA3
Component Description
The intake air temperature sensor is built into the mass air flow sensor. The sensor detects intake air temperature and transmits a signal to the ECM. The temperature sensing unit uses a thermistor which is sensitive to the change in temperature. Electrical resistance of the thermistor decreases in response to the temperature rise.
Reference data
IAT Sensor Reference Data
25 (77)
Resistance kΩBetween 0.09 and 43
NOTE
*: These data are reference values and are measured between ECM terminal 77 (Intake air temperature sensor) and ground.
CAUTION
Do not use ECM ground terminals when measuring input/output voltage. Doing so may result in damage to the ECM's transistor. Use a grond other than ECM terminals, such as the ground.