Idle Speed/Ignition Timing/Idle Mixture Ratio Inspection - Idle Check and Ignition Timing Procedure (Cont'd)
EF & EC-28flowchartIdle Check and Ignition Timing Procedure (Cont'd)
| Specification | Value |
|---|---|
| M/T idle speed | 650 +/- 50rpm |
| N-CVT idle speed | 750 +/- 50rpm |
| M/T + L.S.D. idle speed | 750 +/- 50rpm |
| M/T (for North Europe) idle speed | 750 +/- 50rpm |
| M/T + L.S.D. (for North Europe) idle speed | 850 +/- 50rpm |
M/T idle speed
650 +/- 50rpm
N-CVT idle speed
750 +/- 50rpm
M/T + L.S.D. idle speed
750 +/- 50rpm
M/T (for North Europe) idle speed
750 +/- 50rpm
M/T + L.S.D. (for North Europe) idle speed
850 +/- 50rpm
1
B (from previous page)
2
1. Press "BACK" OR 1. Turn off engine and connect throttle sensor harness connector. 2. Start engine.
3
Race Engine (2,000-3,000 rpm) 2 or 3 times under no-load and run engine at idle speed.
4
Check idle speed - Read idle speed in "DATA MONITOR" mode with CONSULT OR Check idle speed.
O.K.
C (continues)
N.G.
5
Check A.A.C. Valve and replace if necessary.
6
Check A.A.C. Valve harness and repair if necessary.
7
Check E.C.U. function* by substituting another known good E.C.U.
8
A (continues)
NOTE
* E.C.U. may be the cause of a problem, but this is rarely the case.