TROUBLE DIAGNOSES - Basic Inspection

BEFORE STARTING: 1. Check service records for any recent repairs that may indicate a related problem, or the current need for scheduled maintenance. 2. Open engine hood and check the following: • Harness connectors for proper connections • Vacuum hoses for splits, kinks, and proper connections • Wiring for proper connections, pinches, and cuts

CONNECT CONSULT TO THE VEHICLE: Connect "CONSULT" to the diagnostic connector and select "ENGINE" from the menu. Switch ignition to "ON".

DOES ENGINE START?

CHECK IDLE ADJ. SCREW. INITIAL SET RPM. 1. Select "A.A.C. VALVE" in "WORK SUPPORT" mode. 2. Press "START" and check if engine drops to idle speed (in "N" position). — OR — Disconnect throttle sensor harness connector and check if engine rpm falls to idle speed (in "N" position). Vehicle idle speeds — M/T: 600 ± 50 rpm / N-CVT: 700 ± 50 rpm / M/T + L.S.D.: 600 ± 50 rpm / M/T (for North Europe): 600 ± 50 rpm / M/T + L.S.D. (for North Europe): 600 ± 50 rpm

A (continues on next page)