TROUBLE DIAGNOSES - Consult (Cont'd)
EF & EC-49flowchartConsult (Cont'd)
Procedure
Select "Data Monitor" from the "select DIAG MODE" menu
Run engine at idle speed
Run engine at idle speed
Select "ECU INPUT SIGNALS" from the "SELECT MONITOR ITEM" menu and press "START"
Select "ECU INPUT SIGNALS" from the "SELECT MONITOR ITEM" menu and press "START"
The display shows the detected signal levels of the sensors being monitored. The screen can be scrolled by touching the upward and downward arrows on the keypad to reveal monitored sensors displayed on the next screen.
The display shows the detected signal levels of the sensors being monitored. The screen can be scrolled by touching the upward and downward arrows on the keypad to reveal monitored sensors displayed on the next screen.
Press "RECORD" to begin real-time data monitoring.
Press "RECORD" to begin real-time data monitoring.
When a failure is detected or the E.C.U. notices an engine stall condition, the "Fail" condition is displayed at the top of the screen.
When a failure is detected or the E.C.U. notices an engine stall condition, the "Fail" condition is displayed at the top of the screen.
Press "STOP" to end data recording and display failure conditions if applicable.