Nissan Micra K11 silhouetteK11

CYLINDER HEAD — Installation (Cont'd) (Supplement-V)

EM-5027prose procedure

Source typo "futher" (for "further") in step 7 preserved verbatim. Rocker-cover tightening order is the install order — distinct from the loosening order shown on EM-5020 fig NEM273 (same figure ref, used for both removal and installation directions per the manual's convention).

Continued from EM-5026

Installation (Cont'd)

Cylinder head — Installation (continued)

  1. 3
    Check valve clearance. Refer to "VALVE CLEARANCE", (EM-5028).
  2. 4
    Install rocker cover.
    Tighten rocker cover bolts to the specified torque in 2 stages in numerical order as shown in the figure.
    Top view of the rocker cover showing the 8-bolt tightening sequence: top row (left → right) 4, 8, 5, 1; bottom row 3, 7, 6, 2. Oil filler cap circle visible in the centre and a small square mark on the right end indicating the front of the engine.
    NEM273
  3. 5
    Install front exhaust pipe to manifold.
  4. 6
    Install injection tubes.
  5. 7
    Install all futher parts in reverse order of removal.
    Source spelling "futher" preserved as printed.
Support our work!

See also

EM-5028 — VALVE CLEARANCE

Search Manual

Search pages, specs, and procedures