REMOVAL AND INSTALLATION — Components

AT-7126parts diagram

Full-page exploded view with ~19 distinct callouts. Part numbers are not assigned per-callout in the source — keys are written here as sequential numbers for renderer compatibility.

Continued from AT-7125

Components

NOTE

Legend symbols on the drawing: a (CVT fluid NS-1) marker = apply NS-1 CVT fluid to part before assembly; torque values are given as N·m (kg-m, ft-lb) and as N·m (kg-m, in-lb) for smaller fasteners.

Parts Diagram

#	Part Name	Notes
1	PNP switch	Bolts: 4.5 - 5.5 N·m (0.46 - 0.56 kg-m, 40 - 48 in-lb)
2	Manual plate	—
3	Pin (manual plate alignment)	—
4	Shift bracket	14.5 - 17.5 N·m (1.5 - 1.7 kg-m, 11 - 12 ft-lb)
5	CVT fluid pressure sensor	35 - 43 N·m (3.6 - 4.3 kg-m, 26 - 31 ft-lb)
6	Input pulley speed sensor	24 - 28 N·m (2.5 - 2.8 kg-m, 18 - 20 ft-lb)
7	Output pulley speed sensor	4.5 - 5.5 N·m (0.46 - 0.56 kg-m, 40 - 48 in-lb)
8	Transmission harness stay	Bolts: 4.5 - 5.5 N·m (0.46 - 0.56 kg-m, 40 - 48 in-lb); stay-to-case: 14.5 - 17.5 N·m (1.5 - 1.7 kg-m, 11 - 12 ft-lb)
9	Air breather hose with clip	Clip: 23 - 27 N·m (2.4 - 2.7 kg-m, 17 - 19 ft-lb)
10	Torque converter	Sealed unit
11	Differential oil seal (LH/RH)	Apply CVT fluid NS-1 to seal lip
12	Fluid level gauge	Dipstick
13	Fluid charging pipe	Main bracket: 30.4 - 40.2 N·m (3.1 - 4.1 kg-m, 23 - 29 ft-lb); fixing bolts: 4.5 - 5.5 N·m (0.46 - 0.56 kg-m, 40 - 48 in-lb)
14	Oil filter	12 - 16 N·m (1.2 - 1.6 kg-m, 9 - 11 ft-lb)
15	Oil cooler tube	Fittings: 8.5 - 9.5 N·m (0.87 - 0.96 kg-m, 76 - 84 in-lb); bracket: 40 - 45 N·m (4.1 - 4.5 kg-m, 30 - 33 ft-lb)
16	Copper washer	Apply CVT fluid NS-1 (×)
17	Magnet (oil pan)	Collects ferrous debris
18	Oil pan	Bolts: 5.4 - 6.6 N·m (0.55 - 0.67 kg-m, 48 - 58 in-lb)
19	Drain bolt	45 - 50 N·m (4.5 - 5.0 kg-m, 34 - 36 ft-lb); Copper washer — replace each drain

Support our work!

REMOVAL AND INSTALLATION — Components

Components

Search Manual