DTC P0710, P0711 CVT FLUID TEMPERATURE SENSOR CIRCUIT
AT-7060flowchartDiagnostic Procedure
DTC P0710/P0711 CVT fluid temperature sensor diagnostic flow (steps 1-2)
1
CHECK CVT FLUID TEMPERATURE SENSOR WITH TERMINAL CORD ASSEMBLY
2
OK or NG
OK (Without CONSULT-II) / GO TO 3
GO TO 3.
NG
Replace CVT assembly.
OK (With CONSULT-II) / GO TO 2
3
GO TO 2.
4
CHECK INPUT SIGNAL OF CVT FLUID TEMPERATURE SENSOR (With CONSULT-II)
5
OK or NG
NG
Check the following item: Harness for short to ground or short to power or open between TCM and terminal cord assembly (Main harness).
OK / GO TO 4
6
GO TO 4.