PRECAUTIONS - Service Notice

Before proceeding with disassembly, thoroughly clean the outside of the transaxle. It is important to prevent the internal parts from becoming contaminated by dirt or other foreign matter. Disassembly should be done in a clean work area. Use lint-free cloth or towels for wiping parts clean. Common shop rags can leave fibers that could interfere with the operation of the transaxle. When disassembling parts, place them in order in a parts rack so that they can be put back into the unit in their proper positions. All parts should be carefully cleaned with a general purpose, non-flammable solvent before inspection or reassembly. Gaskets, seals, O-rings, circlips and split pins should be replaced any time the transaxle is disassembled. It is very important to perform functional tests whenever they are indicated. The valve body contains precision parts and requires extreme care when removed during service. Before assembly, apply a coat of recommended A.T.F. to all parts. Petroleum jelly may be applied to O-rings and seals and used to hold small bearings and washers in place during reassembly. Do not use grease.

After overhaul, refill the transaxle with new A.T.F.