ON BOARD DIAGNOSTIC SYSTEM DESCRIPTION - CONSULT-II (Cont'd)
AT-7028prose procedureCONSULT-II (Cont'd)
Engine Brake Level Adjustment (Cont'd)
- 9Set "ENGINE BRAKE LEVEL" by touching "UP" or "DOWN". ENGINE BRAKE LEVEL — 0: Initial set value (Engine brake level control is activated). OFF: Engine brake level control is disactivated.
- 10Turn ignition switch "OFF", wait at least 5 seconds and then turn ignition switch "ON".
- 11Engine brake level set is completed.
CAUTION
Mode "+1" "0" "-1" "-2" "OFF" can be selected by pressing the "Up" "DOWN" on CONSULT screen. However, do not select mode other than "0" and "OFF". if the "+1" or "-1" or "-2" is selected, that might cause the abnormality of drivability.
DIAGNOSTIC PROCEDURE WITHOUT CONSULT-II
EURO-OBD Self-diagnostic Procedure (With GST)
Refer to EC section ["Generic Scan Tool (GST)", "ON BOARD DIAGNOSTIC SYSTEM DESCRIPTION"].
EURO-OBD Self-diagnostic Procedure (No Tools)
Refer to EC section ["Malfunction Indicator (MI)", "ON BOARD DIAGNOSTIC SYSTEM DESCRIPTION"].
HOW TO ERASE SELF-DIAGNOSTIC RESULTS (WITH CONSULT-II)
Erase Self-Diagnostic Results (With CONSULT-II)
- 1If the ignition switch stays "ON" after repair work, be sure to turn ignition switch "OFF" once. Wait for at least 3 seconds and then turn it "ON" again.
- 2Turn CONSULT-II "ON", and touch "CVT".
- 3Touch "SELF-DIAG RESULTS".