DTC P0720 OUTPUT PULLEY SPEED SENSOR CVT - Description (Cont'd)
AT-7067prose procedureDescription (Cont'd)
With CONSULT-II
- 1Turn ignition switch "ON" and select "DATA MONITOR" mode for "ENGINE" with CONSULT-II.
SAT557J - 2Start engine and maintain the following conditions for at least 6 consecutive seconds. THRTL POS SEN: More than 0.7 - 0.8V; Selector lever: D position; Driving location: Driving the vehicle uphill (increased engine load) will help maintain the driving conditions required for this test. If the check result is NG, go to "DIAGNOSTIC PROCEDURE", AT-7069.
With GST
NOTE
Follow the procedure "With CONSULT-II".