TROUBLE DIAGNOSIS — BASIC INSPECTION - Road Test (Cont'd) - 1. CHECK BEFORE ENGINE IS STARTED / 2. CRUISE TEST
AT-7040prose procedureRoad Test (Cont'd)
1. CHECK BEFORE ENGINE IS STARTED
Step 1 — CHECK SPORT INDICATOR LAMP
1
1. CHECK SPORT INDICATOR LAMP
1. Park vehicle on flat surface.
2. Move selector lever to "P" position.
3. Turn ignition switch to "OFF" position. Wait at least 5 seconds.
4. Turn ignition switch to "ON" position. (Do not start engine.)
5. Does SPORT indicator lamp come on for about 2 seconds?
No → Stop ROAD TEST.
2
Yes → GO TO 2.
Step 2 — CHECK SPORT INDICATOR LAMP (flicker)
1
2. CHECK SPORT INDICATOR LAMP — Does SPORT indicator lamp flicker for about 8 seconds?
No → 1. Turn ignition switch to "OFF" position. 2. Perform self-diagnosis and note NG items. Refer to TCM SELF-DIAGNOSIS PROCEDURE (NO TOOLS), AT-7029.
2
Yes → Perform self-diagnosis and check NG items on the DIAGNOSTIC WORKSHEET, AT-7035. Refer to TCM SELF-DIAGNOSIS PROCEDURE (NO TOOLS), AT-7028.
Step 3 — TEST DRIVE
Probable Cause
Corrective Action
3. TEST DRIVE — Drive the vehicle and verify that there are no abnormalities.
TEST END
Cause
3. TEST DRIVE — Drive the vehicle and verify that there are no abnormalities.
Fix
TEST END
2. CRUISE TEST
NOTE
Check all items listed in Parts 1 through 3.
With CONSULT-II
NOTE
Using CONSULT-II, conduct a cruise test and record the result.
Print the result and ensure that shifts and lock-ups take place as per Shift Schedule.
NOTE
Document IDs: NKAT0028S02 / NKAT0028S04 / NKAT0028S0401